Відео

Your accessories are awesome. And that's why pegboard/slatwall remains king, the amount and variety of mass market accessories made for the system.

K I’m gonna try again

Do I need to print the 4x stacks with supports enabled?

Damn, bought a resin printer two days ago and even though I have gloves etc I have this shit everywhere.

Great job :D Just bought it on the blendermarket and it´s super helpful. I have a question, is it possible to parent other objects to the instanced gears etc. without boolean it to the original gear?

Makes me happy my dad has his printer in his open air garage and that he can just send it's commands for printing remotely from his studio at the other side of his house.

I love the idea, but I'm confused why you would want the bins to be sideways...

Oh great! Let's combine two fantastic open source ideas together and sell them with yet another subscription plan. Eat sand dude

Mounting was hard for me because of too many screws. If I did this again, I would just assemble the whole thing then put a left top mount, but not screw whole the way to keep it rotatable, then level the panel and mark the other holes and then drill the holes. After that I would put just few screws at the bottom to keep it aligned to surface. Note to the creator: Make sets, like 4x3, 3x3, 6x8 whatever, so people will not get lost while trying to figure out if corner, side or core tiles are needed. Also mounting sets for each one is required.

I don't understand how to hang the trays or buckets on the panel. I can't find the hanging tool. I don't know how you do it.

Have you seen Onsel, the new front-end for FreeCAD? I would be interested in your take on it.

So If I live in a warm and ventilated place I should be fine? Like its usually 32+ degrees here about 80% of the year. Or did I missed something?

"It is not a good practice to have such a large pop-up window, especially when it concerns subscription cancellations. I have already pressed the unsubscribe button sometime in May 2024, but I wasn't paying close attention to the pop-up's corner. The unsubscribe button is hidden among several other marked buttons, making it difficult to notice. Please review your interface design."

Hello I love your product and I want to print some Multiboard. But my problem is that I am new to 3-D printing and I just got my Bambu lab X1C 4 days ago and still trying to figure out all the settings in the slicer, which is very overwhelming for me since I have zero past experience in the field. So I was wondering if you could make a video on the settings do use and modify in bambu lab to print Multiboard as fast as possible, without damaging the quality like what is the best settings to use Ludacris mode 🙏

Also, I think its time to revisit FreeCAD. The topographical naming error has been addressed. Also quite a few sketching additions. Keep up your great work !!

Thanks mom, I'll go back to breathing fdm fumes the way nature intended

this is awesome, I want to make my own prizes for a series of events I run, this is perfect for that personal touch!

i'm building a resin 3d printing area for the van i live in. ✌🏼

"Ronko Garden Weasel" ! lol (I want one)... ...or the slap chop, or the shake weight ! Thanks, some great engineering there.

over hang and tolerence test.

hello tats great job . ı have a questıon how can ı use rails?

Nice

Thank's ! That's done, this tutorial is very useful for me

Thank you

A simulator 😂 subscribed

I did follow you step by step and I got a really cool 3d object but when I tried to export it in STL file it gave me too many red flags, I did repeat your video over and over and started from scratch it didn’t work out , I was planning to get the course and join your academy but if this video didn’t worked out I feel a hesitated to join your course

Please provide links to the heat exchange unit

Yall pay $20+ for a kilo of filament, but you can't pay a designer for a well-thought out if derivative system, and then you complain about artists not making money... yeahh... Literally, this is why we can't have nice things.

its not working with b3d 4+?

I'm checking out the sketcher for Blender add-on, in the UA-cam demo you click CTRL - (minus) but I don't get the BTOOLS modifier that Jonathan gets do I need to install something else?

Excellent Course, thanks

You are an excellent Teacher

When I click on the link it takes me to the correct page but only has the tab to view membership So i can not actually download it Any idea's?

so glad to have found your channel and subscribed. i just started 3d printing with a bambu P1S. and I felf like I needed a software for roughing out my 3d ideas then another for drawing up with measurements. i tried to use design spark for roughing out then onshape for drawing up to measurements. i do have some blender experience and have bought Sketcher. do you think 2 years later after this video that things are the same? or is there hopefully a clear obvious best in class for rough ideas and drawing up into scale softwares at this point. thanks for reading. love your videos

my 3d printer built another 3d printer that built a CNC that built a drill press, that built a soldering machine, that built my tool system, that built my storage space(this + gridfinity), that made my lab more organized that allowed me to build faster, that made me able to build more, that completely changed how i look at the world. aside from food, i make at least 60% of everything i use. my lab built itself. all i wanted was to make RC aircraft, but now, i can make anything. this is the greatest hobby in the world. just an example: i bought a vacuum flask, a collection beaker, and some tubing, but every other part of my vacuum press coffee machine was 3D printed. i even use the build plate to put heat into the system.

i dont have a lot of expendable money. i have like $200/mo to play around with and most of it is spent on RC jet or printer parts, but i will donate to you. i dont patreon, superlike, etc, but if i fell that its worth donating, i will, out of respect. ill get you $20 as soon as i finish this project. thanks a ton for this. this and gridfinity took my lab to the next level.

free, but donation based is the way to go. it builds respect with those who download it. i have a list of makers i owe a coffee that ive downloaded their files. i dont have a lot of money to play around with, maybe $200/mo if that. it may take me a while, but youll get your coffee, and if i use a lot of it, ill buy you two. i always give back when i receive something valuable, and i never forget those who hook me up.

this was PERFECT! thanks so much!

thanks bro

ty

Thank you for making this

Than you for this. Is Cad sketcher file could be exported to AutoCad?

Hey Keep Makin, hi Comment-Section! At 27:06 you mention to clean the mesh up. I have a little more complex part, but I see we have the same issues: I dont know how the fudge to remove these weird lines which randomly connect from a point on a nearby edge to a random point in a hole. It splits the faces into weird parts, which makes it impossible to emboss or bevel edges. What can I do to fix this?

did anybody tried to print with 0.6mm nozzle?

Thanks. I have just started resin printing and will take this more seriously